300 Litre Agitated Jacketed Reactor
Another 300 litre Agitated Jacketed Reactor custom fabricated by Stainless Tank & Mix - coated with PFA Teflon on the inside to provide adequate chemical resistance.
Custom Mix Tanks for Mixing Chemicals
Two basic but very effective mix tanks - a 300 litre and a 600 litre - built to order by Stinaless Tank & Mix for a customer for mixing chemicals.
1000 Litre Jacketed Batch Pasteuriser
A very neat 1000 litre batch pasteuriser jacketed, insulated and clad with seal welded cladding. It is fitted with a PLC and HMI panel for automated controls. All designed specifically…
500 Litre Insulated Mix Tank
A bespoke 500 Litre Insulated Mix Tank custom fabricated by Stainless Tank & Mix at their factory in Minto, NSW.
100 Litre Pressure Vessels
100 litre pressure vessels ready for export custom manufactured by Stainless Tank & Mix to bespoke specifications.
300 Litre Jacketed Reactor
Jacketed Reactor fabricated by Stainless Tank and Mix - a 300 litre vacuum vessel with operating pressure of full vacuum, a hot oil jacket pressure of 300kPa at 100˚C.
Custom Specialised Tank
Stainless Tank & Mix produced this custom specialised tank to replace an existing tank that was difficult to clean.
200 Litre Budget Mobile Ribbon Blender
200 litre budget mobile ribbon blender with safety switch custom fabricated by Stainless Tank & Mix.
1500 Litre Insulated Hopper
1500 litre insulated hopper fabricated by Stainless Tank & Mix - inside skin is SAF2205 duplex stainless polished to 0.8Ra with a 316 fully welded cladding.
205 Litre Open Top Drums
Stainless Tank & Mix built 4 heavy duty smooth wall 205 litre open top drums with our new laser welder.
2000 Litre Buffer Tank
2000 litre buffer tank fabricated by Stainless tank & Mix mounted on load cells to store liquid that arrives in IBCs. Includes a stainless operator platform and IBC support frame.
6000 Litre Industrial Ribbon Blender
6000 litre heavy duty industrial ribbon blender built by Stainless Tank & Mix, still going strong.
Feeder Tank for Viscous Product
A Feeder Tank for Viscous Product designed and constructed by Stainless Tank and Mix as a very mobile filling solution for viscous products.
Beware of Vacuum Damage caused by Poor Design or Construction
Beware vacuum damage! Stainless Tank & Mix recently completed a successful removal and replacement of a vacuum damaged 2 tonne weigh silo at a food product factory.
2000 Litre Ribbon Blender with End-mounted Butterfly Lids
Another 2000 litre ribbon blender for a repeat customer - have been building blenders for the same group for 30 years so we must be doing something right.
Cement Mixer Stingray CM90
Stingray CM90 Mixer
The popular Stingray CM90 powder blender. This blender is also available with a full stainless steel frame and a gearmotor direct drive with a model number of CM90FSS.
CM90 Powder Blender
Meet the popular CM90 powder blender made by Stainless Tank & Mix. The CMP90SS comes with a full stainless steel frame and a gearmotor direct drive.
Celebrating 50 Years
CELEBRATING 50 YEARS OF GREAT SERVICE AND SOLUTIONS - PAST, PRESENT & FUTURE50 years ago Chris Firth registered the name Camair Industries and commenced contract work in a limited field.Forward…
160 Litre Heated Mix Tank for a Global Pharma Company
ST&M just finished this little 160 litre heated mix tank for a global pharma company's facility in South East Asia.
Stainless Reactor to Heat Up To and Operate at 400 Degree Celsius
A stainless reactor to heat up to and operate at 400 deg C - another project by Stainless Tank & Mix successfully completed that we had never built before.
Assembly Mixer
There are always some jobs that make you especially proud of the worksmanship and ingenuity – this mixer assembly has come up exceptionally well.
Hoppers and Transitions
A fine array of hoppers and transitions being manufactured by Stainless Tanks and Mix before Christmas.
Special Purpose Agitator
Just finished a small top entry special purpose agitator with 2 alternative blades.
Wall Mounted Balance Tank
A small wall mounted balance tank custom fabricated by Stainless Tank and Mix.
Twin Outlet Bunker Hopper
Just completed a refurbishment job to the feeding arrangement to a tablet press which included a new twin outlet bunker hopper with feeder cones to the press.
100 Litre Dimple Jacketed Steep Cone Mix Tanks
100 litre dimple jacketed steep cone mix tanks for a major research company having 2 dimple zones and complete with stainless steel control panel.
Silk Purse
You've heard the old saying - you can't make a silk purse out of a sows ear meaning = What does it mean to make a silk purse out of a sow ear?
Sheet Metal
Just finished a nice bit of sheetmetal for the end of the month. Product flumes for a food factory.
5 Stainless Pots for a Pharma Customer
32 off process pots in 5 different sizes for a pharma customer.
316 Grade Chemical Storage Tank
90,000 litre 316 grade chemical storage tank. The tank is insulated and clad with stainless steel light sheet.
200 Litre Open Top Drums
6 off smooth wall 200 litre open top drums in 316 grade stainless steel with lid and lock ring for a leading pharmaceutical manufacturer.
Height Transition Assembly
More a work of art than anything else, but it is actually a reduced height transition assembly.
Production Line Brackets
A customer needed some production line brackets made in a hurry, but they had to be simple, cheap and lighter than the existing.
Punch Tool Carriers
8 off punch tool carriers for a tablet press just completed to replace some rather dilapidated units.
70 Litre Hopper
A small 70 litre hopper complete with internal spray ball fed from the side and magnetic locking to the lid.
2 High Spec Pressure Rotary Cookers
Another 2 off very high spec pressure rated rotary cookers for food. This is the 11th and 12th units we have built. A happy customer always comes back.
5000 Litre Replacement Reactors with Steam Pipe Coils
2 off 5000 litre replacement reactors with steam pipe coils.
90 Litre Stainless Steel Tumble Mixer
Our revised front tipping design - 90 litre full stainless steel tumble mixer.
Stainless Steel Press System
Just completed a full stainless steel press system [some members are mild steel but completely skinned with stainless steel sheet.
5 Litre Ribbon Blender with Full Vacuum Rating
Just finally finished this 5 litre ribbon blender with full vacuum rating as well as a heating jacket complete with thermostat controlled heating elements all set up to be on castors for a mobile solution.
2 Smart Looking Tanks
Just finished 2 very smart looking tanks / IBC's set up for line marking paint. All radiused corners and a bag filter cage.